Unveiling The Hager Ecr140d: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Hager ECR140D Information

the information about the Hager ECR140D:

Introduction

The Hager ECR140D is a single-phase energy meter with a rated current of 40A and a display resolution of 0.01kWh. It is a direct-connected meter, meaning that it does not require a current transformer. The ECR140D is equipped with a Modbus RTU interface, which allows it to be connected to a home automation system or other monitoring device. The meter also meets the MID (Measurement Instruments Directive) requirements, making it suitable for use in commercial and industrial applications.

Full specifications

The following table summarizes the full specifications of the Hager ECR140D:

FeatureValue
Rated current40A
Display resolution0.01kWh
Measuring range40,000kWh
Accuracy class1
Power factor range0.5 - 1.0
Frequency range50/60Hz
Voltage range230V AC
Temperature range-20 to 60°C
Modbus RTU interfaceYes
MID compliantYes

Features

The Hager ECR140D has a number of features that make it a versatile and reliable energy meter. These features include:

  • Direct-connected design: No need for a current transformer
  • Modbus RTU interface: Easily connects to home automation systems and other monitoring devices
  • MID compliant: Meets international standards for accuracy and performance
  • Long measuring range: 40,000kWh
  • High accuracy: Class 1 accuracy
  • Wide temperature range: -20 to 60°C

What's in the box

The Hager ECR140D comes with the following items:

  • Energy meter
  • Instruction manual
  • Mounting screws

Additional information

The Hager ECR140D is a high-quality energy meter that is suitable for a variety of applications. It is easy to install and use, and it meets the highest standards of accuracy and performance. If you are looking for a reliable and versatile energy meter, the Hager ECR140D is a great option.

Hager ECR140D Compare with Similar Item

a table comparing the Hager ECR140D with similar items:

FeatureHager ECR140DSchneider Electric EPH42327ABB S201-K
Voltage230 V230 V230 V
Current rating16 A16 A16 A
Power rating3680 W3680 W3680 W
Dimensions (H x W x D)92 x 72 x 36 mm92 x 72 x 36 mm92 x 72 x 36 mm
Weight0.4 kg0.39 kg0.4 kg
Price$20$18$19

As you can see, the Hager ECR140D is very similar to the Schneider Electric EPH42327 and ABB S201-K. All three breakers have a voltage rating of 230 V, a current rating of 16 A, and a power rating of 3680 W. They are also all the same size and weight. The main difference between the three breakers is the price. The Hager ECR140D is the most expensive, followed by the Schneider Electric EPH42327 and then the ABB S201-K.

If you are looking for the cheapest breaker, the ABB S201-K is the way to go. However, if you are willing to pay a little more for a breaker with a slightly better reputation, the Schneider Electric EPH42327 or Hager ECR140D are both good options.

Ultimately, the best breaker for you will depend on your individual needs and budget. If you are not sure which breaker to choose, it is always a good idea to consult with a qualified electrician.

Hager ECR140D Pros/Cons and My Thought

a summary of the Hager ECR140D pros and cons, user reviews, and my thoughts:

Pros:

  • The Hager ECR140D is a high-quality, durable timer switch that is perfect for use in a variety of applications.
  • It is easy to use and install, with a simple, straightforward interface.
  • The timer switch has a wide range of settings, allowing you to customize it to your specific needs.
  • It is also very energy-efficient, saving you money on your electricity bills.

Cons:

  • The Hager ECR140D is a bit more expensive than some other timer switches on the market.
  • It is not as versatile as some other timer switches, as it cannot be used to control multiple devices at once.
  • The timer switch is not weatherproof, so it should not be used outdoors.

User reviews:

Overall, user reviews of the Hager ECR140D are positive. Many users praise the timer switch for its ease of use, durability, and energy efficiency. Some users have also commented on the timer switch's wide range of settings and its ability to save them money on their electricity bills.

However, there are a few negative reviews of the Hager ECR140D. Some users have complained that the timer switch is not as versatile as they would like, and that it is not weatherproof. Additionally, a few users have reported that the timer switch has stopped working after a few years of use.

My thoughts:

Overall, I think the Hager ECR140D is a great timer switch. It is well-made, easy to use, and has a wide range of settings. However, it is a bit more expensive than some other timer switches on the market. If you are looking for a high-quality, durable timer switch that is easy to use, then the Hager ECR140D is a great option. However, if you are on a budget or need a more versatile timer switch, then you may want to consider other options.

Here are some additional thoughts on the Hager ECR140D:

  • The timer switch is perfect for use in a variety of applications, such as controlling lights, appliances, and irrigation systems.
  • The timer switch can be used to save energy by turning off devices when they are not in use.
  • The timer switch is backed by a 2-year warranty.

If you are considering purchasing the Hager ECR140D, I recommend reading the user reviews to get a better idea of what other people think of the timer switch. You can also contact Hager customer service for more information.

Hager ECR140D Where To Buy

some places where you can buy Hager ECR140D and spare parts:

  • Direct from Hager: You can buy the Hager ECR140D directly from the Hager website. They have a wide variety of spare parts available as well.
  • Walmart: Walmart is another good option for buying Hager ECR140D. They usually have a good selection of spare parts as well.
  • Amazon: Amazon is always a good place to check for electronics. They usually have competitive prices and a wide selection of spare parts.
  • Best Buy: Best Buy is another good option for electronics. They usually have a good selection of Hager products and spare parts.
  • Lowes: Lowes is a home improvement store that also sells electronics. They usually have a good selection of Hager products and spare parts.
  • eBay: eBay is a good place to find used or hard-to-find items. You may be able to find a Hager ECR140D or spare part on eBay for a good price.

I hope this helps!

Hager ECR140D Problems and Solutions

Sure. Here are some common issues and problems with the Hager ECR140D and their solutions, as reported by experts:

  • The breaker trips frequently. This could be due to a number of factors, such as a short circuit, an overload, or a loose connection. To troubleshoot the issue, you can first check the circuit breaker's trip indicator to see if it is tripped. If it is, you can try resetting it by turning it to the OFF position and then back to the ON position. If the breaker trips again, you will need to investigate further to determine the cause of the problem.
  • The breaker doesn't trip when it should. This could be due to a number of factors, such as a faulty breaker, a loose connection, or a problem with the wiring. To troubleshoot the issue, you can first check the circuit breaker's trip indicator to see if it is tripped. If it is not, you can try to trip it by turning on a high-powered appliance or device. If the breaker still doesn't trip, you will need to investigate further to determine the cause of the problem.
  • The breaker makes a clicking noise when it is turned on or off. This is a normal sound that is caused by the breaker's internal mechanisms. However, if the clicking noise is loud or persistent, it could be a sign of a problem. In this case, you should contact a qualified electrician to inspect the breaker.
  • The breaker is hot to the touch. This could be a sign of a problem, such as a loose connection or a short circuit. If the breaker is hot, you should turn off the power to the circuit and contact a qualified electrician to inspect it.

Here are some additional tips for troubleshooting Hager ECR140D problems:

  • Always wear safety glasses and gloves when working with electrical equipment.
  • Make sure that the power is off to the circuit before you start working on it.
  • Use a multimeter to check the voltage and current levels in the circuit.
  • If you are not comfortable troubleshooting electrical problems, contact a qualified electrician.

I hope this helps!

Hager ECR140D Manual

Hager ECR140D Manual

Safety Information

  • Before using the Hager ECR140D energy meter, please read and understand this manual carefully.
  • The ECR140D is a direct-connected, single-phase energy meter with a rated current of 40A and a display length of 1m. It is compliant with the IEC 62052-21 standard.
  • The ECR140D is not a safety switch and should not be used as such. It is only intended to measure electrical energy consumption.
  • Always disconnect the power supply before working on the ECR140D.
  • Do not touch the live terminals of the ECR140D.
  • Keep the ECR140D away from water and moisture.
  • Do not expose the ECR140D to extreme temperatures or humidity.
  • Do not use the ECR140D if it is damaged.

Before Use

  • The ECR140D can be installed in any standard DIN rail mounting box.
  • The ECR140D can be connected to a 230V AC mains supply.
  • The ECR140D can be configured to measure energy consumption in different tariffs.
  • The ECR140D can be connected to a Modbus RTU master device to read and write data.

Troubleshooting

  • If the ECR140D does not display any data, check the power supply connection.
  • If the ECR140D displays incorrect data, check the meter settings.
  • If the ECR140D is not communicating with a Modbus RTU master device, check the communication settings.

Maintenance

  • The ECR140D requires no maintenance.
  • If the ECR140D becomes dirty, wipe it with a dry cloth.
  • Do not use any cleaning solvents on the ECR140D.

Warranty

The Hager ECR140D is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the ECR140D becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about the Hager ECR140D, please contact:

Additional Information

The Hager ECR140D is a versatile and reliable energy meter that can be used in a variety of applications. It is easy to install and use, and it requires no maintenance. The ECR140D is backed by a two-year warranty, so you can be confident that it will provide accurate energy measurements for years to come.

Comments

Post a Comment

Popular posts from this blog

Milwaukee 4097-20: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Milwaukee 4097-20 Information The Milwaukee 4097-20 is a 15-amp diamond coring motor that provides powerful and reliable performance for a variety of applications. It features a 500/1000 rpm operating speed, a clutch to protect gears and motor against overload, and a metal housing for durability. The 4097-20 can handle core bits from 1-1/4 to 5 inches in diameter, making it a versatile tool for a variety of tasks. Image of Milwaukee 4097-20 Diamond Coring Motor Specifications
Read more

Fluke Flk-369 Fc: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Fluke FLK-369 FC Information The Fluke 369 FC is a true-rms leakage current clamp meter that helps you detect, document, record, and compare leakage current readings over time. This can help you prevent unplanned downtime and identify intermittent GFCI and RCD trips. Introduction The Fluke 369 FC has a large 61 mm jaw that can accommodate extra-large conductors. The jaw is fully shielded to accurately capture very small leakage signals and minimize external electromagnetic interference. The meter also features a high resolution of 1 μA, making it ideal for measuring even the most minuscule leakage currents.
Read more