Fortrava

Worx WX163.2 Information the information about the Worx WX163.2 lawn mower: Introduction The Worx WX163.2 is a cordless lawn mower that is perfect for small to medium-sized yards. It is lightweight and easy to maneuver, making it a great choice for those who have limited mobility. The WX163.2 also features a powerful motor that can handle even the thickest grass.

Bosch UNEO Information the Bosch UNEO information: Introduction The Bosch UNEO is a cordless rotary hammer that is designed for a variety of tasks, including hammering, drilling, and screwdriving. It is powered by a 12V POWER FOR ALL battery, which can also be used with other Bosch tools in the POWER FOR ALL system. The UNEO is a lightweight and compact tool, making it easy to carry and maneuver. It also features a two-speed gearbox, which allows you to select the right speed for the task at hand.

Craftsman CMXGJAMD25PS Information The Craftsman CMXGJAMD25PS is a 25cc gas pole saw that is designed for trimming and cutting branches up to 12 feet high. It features a 10-inch Oregon bar and chain, a 2-cycle engine, and a telescoping shaft that can be extended from 7 to 12 feet. The saw also has a rear handle for added control, and a built-in carrying case. Image: Specifications:

Bosch GDR 18V-160 Professional Information the Bosch GDR 18V-160 Professional information: Introduction The Bosch GDR 18V-160 Professional is a cordless impact driver that is designed for demanding applications. It features a high torque of 160 Nm, which allows it to drive even the toughest screws and bolts. The impact driver also has a high speed of up to 2,500 rpm, which makes it ideal for fast-paced work.

Black & Decker KR504CRESK Information The Black & Decker KR504CRESK is a 500-watt corded percussion hammer drill that is ideal for a variety of DIY drilling tasks. It features a hammer action for drilling into masonry up to 13mm, and non-hammer drilling into wood up to 20mm. The spindle lock ensures easy bit change and maximum accessory grip. The KR504CRESK has a high quality 13mm keyless chuck and variable speed for more control, and a secondary handle provides additional comfort and grip on all job applications. Image of Black & Decker KR504CRESK drill Specifications

Black & Decker KS400E Information the information about the Black & Decker KS400E: Introduction The Black & Decker KS400E is a powerful and versatile jig saw that is perfect for a variety of woodworking projects. It features a powerful 5.5 amp motor that provides smooth and accurate cuts, as well as a variable speed control that allows you to adjust the speed to the material you are cutting. The saw also has a bevel angle adjustment of up to 45 degrees, a tool-less blade change system, and a dust blower to keep the cutting line clear.

Makita 6825R Information The Makita 6825R is a 6.5-amp drywall screwdriver that is designed for professional use. It features a variable speed trigger with a range of 0-6,000 rpm, as well as a two-speed gearbox with a high speed of 6,000 rpm and a low speed of 3,000 rpm. The 6825R also has a built-in clutch that prevents overdriving screws, and a depth adjustment knob that allows you to set the desired screw depth. Specifications

PowerPlus POWESET2 Information The PowerPlus POWESET2 is a 900-watt angle grinder that comes with a variety of accessories, making it a versatile tool for a variety of tasks. It has a compact design and a comfortable grip, making it easy to control even for extended periods of time. The POWESET2 also features a spindle lock and quick-change system for easy disc changes. Introduction The PowerPlus POWESET2 is a powerful and versatile angle grinder that can be used for a variety of tasks, including cutting, grinding, and sanding. It has a 900-watt motor that provides plenty of power for even the most demanding jobs. The POWESET2 also features a variety of safety features, including a spindle lock and quick-change system, to help prevent accidents.

Hager SM101C Information The Hager SM101C is a modular, three-phase power meter with RS485 communication. It can measure true RMS values of current, voltage, frequency, active power, reactive power, apparent power, power factor, and higher harmonic content. It also has a built-in pulse output and can be used to measure energy consumption. Specifications

Makita HR2440 Information The Makita HR2440 is a 780-watt SDS-Plus rotary hammer drill. It has two operation modes: hammering with rotation and rotation only. It also has variable speed and reversible rotation. The HR2440 is lightweight and ergonomically designed for comfortable operation. It comes with a side handle, depth gauge, and chuck key. Specifications

Black & Decker BEHTS125 Information The Black & Decker BEHTS125 is a 16-inch electric hedge trimmer with a 3.0-amp motor. It features a dual-action blade that reduces vibration while trimming, and a SAWBLADE at the end of the blade that can cut branches up to 1 inch thick. The hedge trimmer also has a built-in T-handle and full-length trigger for comfort and control. Image of Black & Decker BEHTS125 hedge trimmer Here is a table of the full specifications of the Black & Decker BEHTS125:

Hager ECR140D Information the information about the Hager ECR140D: Introduction The Hager ECR140D is a single-phase energy meter with a rated current of 40A and a display resolution of 0.01kWh. It is a direct-connected meter, meaning that it does not require a current transformer. The ECR140D is equipped with a Modbus RTU interface, which allows it to be connected to a home automation system or other monitoring device. The meter also meets the MID (Measurement Instruments Directive) requirements, making it suitable for use in commercial and industrial applications.

Bosch PEX 400 AE Information The Bosch PEX 400 AE is an excentric sander that is designed for medium to large sanding and polishing jobs on wood, painted, varnished, and polished flat or curved surfaces, as well as on filler and gypsum. It has a powerful 370-watt motor that delivers smooth, even sanding results. The PEX 400 AE also features an electronic speed preselection that allows you to adjust the speed to the specific task and material, for optimal results. Here are the full specifications of the Bosch PEX 400 AE:

HQ SOLDER01 Information The HQ SOLDER01 is a temperature-controlled soldering iron that is suitable for a wide range of soldering applications. The adjustable temperature range provides a solution to many different soldering tasks. The soldering iron comes with a variety of features that make it easy to use and safe, including: A heat-resistant handle that protects your hands from the heat of the soldering iron An adjustable temperature control knob that allows you to set the temperature precisely for the task at hand A spare soldering tip that can be easily swapped out when the tip becomes worn or damaged A stand that keeps the soldering iron upright when not in use The HQ SOLDER01 is a great choice for anyone who needs a reliable and versatile soldering iron. It is perfect for hobbyists, students, and professionals alike. Image

PowerPlus POWX0760 Information The PowerPlus POWX0760 is a combination table saw and miter saw that offers a versatile range of features for a variety of woodworking projects. It is powered by a powerful 1800W motor that can handle even the toughest cuts, and it features a large 255mm (10") saw blade that can make quick work of even large pieces of wood. The saw also has a tilting table that can be adjusted to 45 degrees in both directions, making it ideal for cutting miters and bevels. Here is an overview of the PowerPlus POWX0760: Powerful 1800W motor: The POWX0760 is powered by a powerful 1800W motor that can handle even the toughest cuts. Large 255mm (10") saw blade: The saw features a large 255mm (10") saw blade that can make quick work of even large pieces of wood. Tilting table: The table can be tilted to 45 degrees in both directions, making it ideal for cutting miters and bevels. Dust extraction: The saw has a dust extraction port that helps to keep your wor...

Bosch GOL 26 D Professional Information The Bosch GOL 26 D Professional is a high-quality optical level that is designed for professional use. It is built to withstand the rigors of outdoor work, with a sturdy metal housing that is dust and splash protected (IP54). The GOL 26 D also features a built-in target collimator and integrated circular vial, making it easy to make accurate measurements. Image: Full specifications:

AEG BE 705 R Information The AEG BE 705 R is a powerful and versatile drill that is perfect for a variety of home improvement tasks. It features a 705-watt motor that provides plenty of power for drilling through wood, metal, and concrete. The drill also has a variable speed trigger that allows you to control the speed of the rotation, and a reversing switch that makes it easy to remove drill bits. Image of AEG BE 705 R drill Table of specifications

Proxxon LWS 28547 Information the information about the Proxxon LWS 28547: Introduction The Proxxon LWS 28547 is a small, lightweight angle grinder that is perfect for precision work. It has a 50mm disc size, which makes it ideal for getting into tight spaces and working on delicate materials. The motor is 100W, which provides enough power for most tasks, but not so much power that it is difficult to control. The LWS 28547 is also very well-balanced, making it easy to use for extended periods of time.

Weller WXD 2020 Information The Weller WXD 2020 is a dual-channel soldering and desoldering station that offers a wide range of features and functionality for professional electronics workers. It features two independent channels, each with its own temperature-controlled soldering iron and desoldering gun. The soldering irons have Power Response Technology, which ensures that the tip reaches its target temperature quickly and accurately. The desoldering gun features a powerful vacuum pump that quickly removes solder from PCBs. The WXD 2020 also features a number of other advanced features, including: A large, 74x38mm touch-screen display with 255x127 resolution A USB port for firmware updates and data logging An ESD-safe glass display An equipotentionally bonded design A connection for an external compressed air supply The WXD 2020 is a powerful and versatile soldering and desoldering station that is well-suited for a wide range of applications. It is ideal for professional electronics...

DeWalt D25013 Information The DeWalt D25013 is a 650-watt SDS-plus rotary hammer drill that is ideal for a variety of applications, including drilling in concrete, masonry, wood, and metal. It features a three-mode operation (hammer drilling, drilling, and chiselling), a powerful motor, and a compact design. Specifications

Einhell TC-SP 204 Information The Einhell TC-SP 204 is a high-quality stationary planer that is perfect for precision, speedy thicknessing and surfacing tasks. It features a sturdy, robust design with a solid aluminium surfacing planer table and a tiltable stop for routing. The planer also comes with a pull-out workpiece support, practical chip extractor, vibration-absorbing feet, overload switch and zero voltage switch for safe operation. Image of Einhell TC-SP 204 Here are the full specifications of the Einhell TC-SP 204:

Makita 199927-0 Information The Makita 199927-0 is a pole saw attachment that is designed to be used with the Makita DUX60Z, EX2650LH, and EX2650LHM power heads. It features a straight shaft that makes it ideal for overhead cutting, and it comes with a 25cm bar and chain. The attachment is also equipped with an automatic chain lubrication system and an adjustable oil pump. Full specifications

Amprobe TH-3 Information The Amprobe TH-3 is a digital relative humidity and temperature meter that is used for a variety of applications, including HVAC, indoor air quality, and environmental testing. It features a precision capacitance sensor that delivers accurate performance with long-term stability. The TH-3 measures the full range of relative humidity from 0% to 100% and features an exceptionally wide ambient temperature measurement range from -20 °C (-4 °F) to 60 °C (140 °F). The sensor is mounted on a long shaft extending from the top surface of the unit, making it easy to probe into ductwork and other hard-to-reach areas. The large LCD display shows two measurements simultaneously, with a full range of display options including hold, min/max, and relative. The TH-3 also features an auto power-off function to conserve battery life. Here is a table of the full specifications of the Amprobe TH-3:

Makita DJR143 Information The Makita DJR143 is a cordless reciprocating saw that is designed for a variety of applications, including cutting wood, metal, and plastic. It is powered by a 14.4V lithium-ion battery and has a variable speed trigger for precise control. The saw also features a built-in LED light for work in dark areas and a dust blower to keep the work area clear. Image of Makita DJR143 cordless reciprocating saw Here are the full specifications of the Makita DJR143:

Tanaka TCH 22EB2 Information The Tanaka TCH 22EB2 is a 22cc petrol hedge trimmer that is designed for professional use. It is powered by a Tanaka PureFire engine that delivers 0.87hp of power, while its S-start technology makes it easy to start. The trimmer has a long reach of 620mm, making it ideal for trimming large hedges and shrubs. It also features a lightweight design and comfortable handle for easy operation. Image

McCulloch CSE2040S Information The McCulloch CSE2040S is a 2000W electric chainsaw that is ideal for occasional use. It is equipped with a 16-inch bar and a tool-less chain tensioner, making it easy to maintain. The CSE2040S also features a high chain speed, chain brake indicator, Soft Start, cable clip, and oil level window. Image:

Dolmar 116 Information The Dolmar 116 is a 56cc, 2.7 kW (6 HP SAE) chainsaw that was manufactured by Dolmar between 1985 and 1986. It is a lightweight and compact chainsaw that is well-suited for light to medium-duty cutting tasks. The 116 features a single-cylinder, two-stroke engine with a piston-ported intake system. The engine is air-cooled and has a compression ratio of 8.5:1. The 116 has a manual recoil starter and a vibration-reducing handlebar. The chainsaw is equipped with a 3/8" Oregon chisel chain and a 33 cm (13 in.) guide bar. Here is a table of the full specifications of the Dolmar 116:

Kreator KRT706510 Information the information about the Kreator KRT706510 laser distance meter: Introduction The Kreator KRT706510 is a digital laser distance meter that can measure distances up to 60 meters with a precision of 2 mm. It features a variety of measurement modes, including single measurement, continuous measurement, and Pythagorean calculation. The KRT706510 also has a built-in display that shows the measured distance, as well as other information such as the unit of measurement, the battery level, and the operating mode.

Stanley SFMCD720 Information the information about the Stanley SFMCD720: Introduction The Stanley SFMCD720 is an 18V brushless drill driver that is part of the Stanley FATMAX V20 cordless power tool system. It features a powerful motor that delivers up to 2,100 RPM and 80 Nm of torque, making it ideal for a variety of drilling and screwdriving tasks. The drill driver also has a two-speed gearbox with speeds of 0-600 and 0-2100 RPM, giving you more control over your work. Specifications Specification Value Voltage 18V Motor Type Brushless Max Torque 80 Nm Max RPM 2,100 Gearbox Two-speed (0-600/0-2100 RPM) Chuck Size 13mm LED Light Yes Weight 1.6 kg Features

Perel E305DO2 Information The Perel E305DO2 is an analog timer that can be used indoors and outdoors. It has a maximum power rating of 3680 W and can be set to activate or deactivate electrical appliances at intervals of 30 minutes to 24 hours. The timer has 48 program slots per day, so you can create a customized schedule for your needs. It is also IP44 rated, making it suitable for use in damp or wet environments. Specifications

DeWalt DW432 Information the information about the DeWalt DW432 belt sander: Introduction The DeWalt DW432 is a 75-mm belt sander that is designed for heavy-duty sanding applications. It features a powerful 800-watt motor that delivers fast and efficient material removal. The sander also has a three-wheel design that increases the contact area of the sanding belt, providing improved sanding performance. Additionally, the DW432 features automatic tracking with manual override, so you can be sure that the sanding belt will run smoothly and precisely.